2-121
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 2 Cisco CMTS Configuration Commands
cable ip-multicast-echo
Examples
The following example shows how to disable IP multicast echo in the cable interface configuration
mode:
router(config-if)#
no cable ip-multicast-echo
The following example shows how to enable IP multicast echo in the cable subinterface configuration
mode:
router(config)#
interface cable 6/0.1
router(config-subif)#
cable ip-multicast-echo
Related Commands
Command
Description
cable ip-broadcast-echo
Enables upstream IP broadcast echo so that the Cisco CMTS can echo
broadcast packets.