5-76
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 5 Cisco CMTS Debugging Commands
debug cable telco-return
debug cable telco-return
To display debug messages for telco-return events, use the
debug cable telco-return
command in
privileged EXEC mode. To disable debugging output, use the
no
form of this command.
debug cable telco-return
no debug cable telco-return
Syntax Description
This command has no arguments or keywords.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
This command is supported only in images that support telco-return operation (-t-).
Examples
The following is sample output from the
debug cable telco-return
and
debug cable telco-return msg
commands:
Router#
debug cable telco-return
Router#
debug cable telco-return msg
01:17:31:Sending TCD message:
TLV type = 1
TLV len = 56
Factory default flag: 1
Phone number 1: 5551212
Service provider name:uBR7246
Connection threshold: 10
Username: guest
Password: password
DHCP authenticate: 1
DHCP server: 10.10.255.255
PPP authentication: 2
Manual dial: 1
Sending TSI message:
DS channel IP address: 10.10.10.10
Registration IP address:10.10.10.10
CMTS boot time: 3080626752
DS channel ID: 0
Epoch: 1
Related Commands
Release
Modification
12.0(4)XI
This command was introduced.
Command Description
debug cable telco-return msg
Displays the Telephony Channel Descriptor (TCD) and Termination
System Information (TSI) messages.
