A-47
Cisco Broadband Cable Command Reference Guide
OL-1581-07
Appendix A Using the ROM Monitor
unalias
unalias
To delete a currently-defined alias, use the
unalias
command in ROM monitor mode.
unalias
name
[
name2 name3
...]
Syntax Description
Defaults
No default behavior or values.
Command Modes
ROM monitor
Command History
Usage Guidelines
The
unalias
command deletes one or more aliases that you have previously defined for the ROM monitor
using the
alias
command.
Examples
The following example shows how to delete one alias:
rommon 13 >
unalias dird
rommon 14 >
The following example shows three aliases being deleted:
rommon 20 >
unalias alias1 alias2 alias3
rommon 21 >
The following example shows the error message that is displayed when you try to delete an alias that
does not exist:
rommon 11 >
unalias gobbledegook
unalias: "gobbledegook" does not exist
rommon 12>
name
Specifies the alias to be deleted.
name2 name3
...
(Optional) Specifies additional aliases to be deleted.
Release
Modification
11.3 NA
This command was introduced on Cisco uBR7200 series routers.
12.1(5)EC
Support was added for Cisco uBR7100 series routers.
12.2(4)BC1
Support was added for the Cisco uBR10012 router. Changes were also made
to the boot procedure after breaking into ROMMON to ensure that all
hardware and software registers are in a known state before loading the new
image.