3-10
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 3 Cisco CMTS Show Commands
show cable arp-filter
Router#
show cable arp cable 5/1/0
ARP Filter statistics for Cable3/0:
Replies Rcvd: 0 total. 0 unfiltered, 0 filtered
Requests Sent For IP: 0 total. 0 unfiltered, 0 filtered
Requests Forwarded: 0 total. 0 unfiltered, 0 filtered
Router#
show cable arp-filter cable 5/1/0 requests-filtered 10
Sid MAC Address IP Address Req-Filtered Req-For-IP-Filtered Rep-Filtered
Router#
show cable arp-filter cable 5/1/0 requests-filtered 10
Sid MAC Address IP Address Req-Filtered Req-For-IP-Filtered Rep-Filtered
57 0007.0e03.2c51 10.3.81.31 20 0 0
81 00C0.c726.6b14 10.3.81.31 12 0 0
Router#
show cable arp-filter cable 5/1/0 requests-filtered 10
Sid MAC Address IP Address Req-Filtered Req-For-IP-Filtered Rep-Filtered
57 0007.0e03.2c51 10.3.81.31 31 0 0
81 00C0.c726.6b14 10.3.81.31 18 0 0
Router#
Note
The
clear counters
command clears all of the packet counters on an interface, not just the ARP packet
counters.
Related Commands
Command
Description
cable arp
Activates cable Address Resolution Protocol (ARP).
cable arp filter
Controls the number of ARP packets that are allowable for each Service ID
(SID) on a cable interface.
cable proxy-arp
Activates cable proxy ARP on the cable interface.
clear arp
Clears the ARP table on the router.
clear counters
Clears the packet counters on all interfaces or on a specific interface.
debug cable arp filter
Displays debugging messages about the filtering of ARP broadcasts.