3-30
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 3 Cisco CMTS Show Commands
show cable hop
show cable hop
To display cable-hop statistics on a Cisco CMTS, use the
show cable hop
command in user EXEC or
privileged EXEC mode.
show cable hop
[
cable
slot/port
[
upstream
uport
] ]
show cable hop
[
cable
slot/subslot/port
[
upstream
uport
] ]
Syntax Description
Command Modes
User EXEC, Privileged EXEC
Command History
Examples
The following examples show typical output from the
show cable hop
and
show cable hop
upstream
commands:
Router#
show cable hop
Upstream Port Poll Missed Min Missed Hop Hop Corr Uncorr
Port Status Rate Poll Poll Poll Thres Period FEC FEC
(ms) Count Sample Pcnt Pcnt (sec) Errors Errors
Cable4/0/U0 down 1000 * * * frequency not set * * * 0 0
Cable4/0/U1 down 1000 * * * frequency not set * * * 0 0
Cable4/0/U2 down 1000 * * * frequency not set * * * 0 0
Cable4/0/U3 down 1000 * * * frequency not set * * * 0 0
Cable4/0/U4 down 1000 * * * frequency not set * * * 0 0
Cable4/0/U5 down 1000 * * * frequency not set * * * 0 0
Cable5/0/U0 down 1000 * * * interface is down * * * 0 0
Cable5/0/U1 down 1000 * * * frequency not set * * * 0 0
Cable5/0/U2 down 1000 * * * interface is down * * * 0 0
Cable5/0/U3 down 1000 * * * interface is down * * * 0 0
Cable5/0/U4 down 1000 * * * interface is down * * * 0 0
Cable5/0/U5 down 1000 * * * interface is down * * * 0 0
cable
slot/port
(Optional) Specifies a cable interface on the Cisco uBR7100 series
and Cisco uBR7200 series routers.
On the Cisco uBR7100 series router, the only valid value is
1/0
. On
the Cisco uBR7200 series router,
slot
can range from 3 to 6, and
port
can be 0 or 1, depending on the cable interface.
cable
slot/subslot/port
(Optional) Specifies a cable interface on the Cisco uBR10012 router.
The following are the valid values:
•
slot
= 5 to 8
•
subslot
= 0 or 1
•
port
= 0 to 4 (depending on the cable interface)
upstream
portnum
(Optional) Specifies an upstream port for which to display the
frequency hop status.
Release
Modification
12.0(4)XI
This command was introduced.