Command Manual (For Soliton) – IPv6 Management
H3C S3100 Series Ethernet Switches
Chapter 1 IPv6 Configuration Commands
1-32
Examples
# Configure a static neighbor entry for Ethernet 1/0/1 of VLAN 1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] ipv6 neighbor 2000::1 fe-e0-89 1 Ethernet 1/0/1
1.1.25 ipv6 neighbors max-learning-num
Syntax
ipv6 neighbors max-learning-num number
undo ipv6 neighbors max-learning-num
View
VLAN interface view
Parameters
number
: Maximum number of neighbors that can be dynamically learned by an
interface, in the range of 1 to 2048.
Description
Use the
ipv6 neighbors max-learning-num
command to configure the maximum
number of neighbors that can be dynamically learned on a specified interface.
Use the
undo
ipv6 neighbors max-learning-num
command to restore the
configuration to the default.
By default, the maximum number is 1024.
Examples
# Set the maximum number of neighbors that can be dynamically learned on the
interface VLAN-interface 1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Vlan-interface 1
[Sysname-Vlan-interface1] ipv6 neighbors max-learning-num 10
1.1.26 ipv6 route-static
Syntax
ipv6 route-static
ipv6-address prefix-length
[
interface-type interface-number
]
nexthop-address
undo ipv6 route-static
ipv6-address prefix-length
