Command Manual (For Soliton) – SNMP-RMON
H3C S3100 Series Ethernet Switches
Chapter 1 SNMP Configuration Commands
1-4
Description
Use the
display snmp-agent group
command to display the information about an
SNMP group, including group name, security mode, related views, and storage mode.
A group is used to define security mode and related views. Users in the same group
have the common attributes.
Security mode falls into three types: authPriv (authentication with privacy), authNoPriv
(authentication without privacy), noAuthNoPriv (no authentication no privacy).
Related views include: read MIB view, write MIB view, and MIB view in which traps can
be sent.
For the configuration of an SNMP group, refer to the
snmp-agent group
command.
Examples
# Display the information about all the SNMP groups.
<Sysname> display snmp-agent group
Group name: v3group
Security model: v3 noAuthnoPriv
Readview: ViewDefault
Writeview: ViewDefault
Notifyview : ViewDefault
Storage-type: nonVolatile
Table 1-2 display snmp-agent group
command output description
Field
Description
Group name
SNMP group name of the user
Security model
SNMP group security mode, which can be AuthPriv
(authentication with privacy), AuthnoPriv (authentication without
privacy), and noAuthnoPriv (no authentication no privacy).
Readview
Read-only MIB view corresponding to the SNMP group
Writeview
Writable MIB view corresponding to the SNMP group
Notifyview
Notify MIB view in which traps can be sent. It corresponds to the
SNMP group
storage-type
Storage type, which can be:
z
volatile: Information will be lost if the system is rebooted
z
nonVolatile: Information will not be lost if the system is
rebooted
z
permanent: Modification is permitted, but deletion is forbidden
z
readOnly: Read only, that is, no modification, no deletion
z
other: Other storage types