Command Manual (For Soliton) – IPv6 Management
H3C S3100 Series Ethernet Switches
Chapter 2 IPv6 Application Configuration
Commands
2-1
Chapter 2 IPv6 Application Configuration
Commands
2.1 IPv6 Application Configuration Commands
2.1.1 ping ipv6
Syntax
ping ipv6
[
-a
source-ipv6-address
|
-c
count
|
-m
interval
|
-s
packet-size
|
-t
timeout
]*
remote-system
[
-i
interface-type interface-number
]
View
Any view
Parameters
-a
source-ipv6-address
: Specifies source IPv6 address.
-c
count
: Specifies the number of packets sent for requesting ICMPv6 echo, ranging
from 1 to 4294967295, with the default of 5.
-m
interval
: Specifies the time intervals in milliseconds to send packets for ICMPv6
echo, ranging from 1 to 65,535, with the default of 200 milliseconds.
z
If a response from the destination is received within the timeout time, the interval
to send the next ECHO-REQUEST equals to the actual response period plus the
value of
interval.
z
If no response from the destination is received within the timeout time, the interval
to send the next ECHO-REQUEST equals to the
timeout
value plus the value of
interval.
-s
packet-size
: Specifies the size in bytes of packets sent for requesting ICMPv6 echo,
ranging from 20 to 8,100, with the default of 56 bytes.
-t
timeout
: Specifies the timeout in milliseconds of receiving ICMPv6 echoes, ranging
from 0 to 65,535, with the default of 2,000 milliseconds.
remote-system
: IPv6 address or host name (a string a 1 to 46 characters) of the
destination device.
-i
interface-type interface-number
: Specifies the type and number of an outgoing
interface. This argument takes effect only when the destination address is a link-local
address and the specified outgoing interface has a link-local address.
