Command Manual (For Soliton) – QoS-QoS Profile
H3C S3100 Series Ethernet Switches
Chapter 1 QoS Commands
1-12
Parameter
interface-type interface-number
: Specifies the type and number of a port, for which the
traffic shaping configuration information is to be displayed.
unit-id
: Unit ID, which is fixed to 1. With this argument specified, the traffic shaping
configuration of all the ports is displayed.
Description
Use the
display qos-interface traffic-shape
command to display the traffic shaping
configuration of a port or all the ports on the device.
Related command:
traffic-shape
.
Example
# Display the traffic shaping configuration of Ethernet 1/0/1.
<Sysname> display qos-interface Ethernet 1/0/1 traffic-shape
Ethernet1/0/1
QID: status max-rate(kbps) burst-size(byte)
----------------------------------------------------
0 : Enable 64 8
1 : Enable 64 8
2 : Enable 640 16
3 : Disable 0 0
Table 1-6
Description on the fields of the
display qos-interface traffic-shape
command
Field
Description
Ethernet1/0/1
Port with traffic shaping configured
QID Queue
ID
status
traffic shaping status of a queue
max-rate(kbps)
Maximum traffic rate of a queue
burst-size(byte)
Burst size of a queue
1.1.13 display qos-interface traffic-statistic
Syntax
display qos-interface
{
interface-type interface-number
|
unit-id
}
traffic-statistic
View
Any view
