Command Manual (For Soliton) – QoS-QoS Profile
H3C S3100 Series Ethernet Switches
Chapter 1 QoS Commands
1-31
View
System view
Parameter
vlan-id
: VLAN ID, in the range 1 to 4094.
inbound
: Specifies to clear the statistics on the inbound packets.
acl-rule
: ACL rules to be applied. This argument can be the combination of multiple
ACLs. For more information about this argument, refer to
Table 1-8
and
Table 1-9
.
Description
Use the
reset traffic-statistics vlan
command to clear the statistics on packets that
are of a VLAN and match specific ACL rules.
Related command:
traffic-statistic vlan
.
Example
# Clear the statistics on packets that match ACL 2000 and are of VLAN 1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] reset traffic-statistic vlan 1 inbound ip-group 2000
1.1.30 traffic-limit
Syntax
traffic-limit
inbound
acl-rule target-rate
[
burst-bucket
burst-bucket-size
] [
conform
con-action
] [
exceed
exceed-action
] [
meter-statistic
]
undo traffic-limit inbound
acl-rule
[
meter-statistic
]
View
System view, Ethernet port view, Port group view
Parameter
inbound
: Performs traffic policing on the inbound packets.
acl-rule
: ACL rules to be applied. This argument can be the combination of multiple
ACLs. For more information about this argument, refer to
Table 1-8
and
Table 1-9
. Note
that the ACL rules referenced must be those defined with the
permit
keyword specified.
target-rate
: Target traffic rate of traffic policing ( in kbps). This argument is in the range
of 64 to 1000000 in system view and port group view. In Ethernet port view, the range of
this argument varies by port type as follows:
z
Fast Ethernet port: 64 to 99,968;
z
GigabitEthernet port: 64 to 1,000,000.