Command Manual (For Soliton) – Information Center
H3C S3100 Series Ethernet Switches
Chapter 1 Information Center Configuration
Commands
1-23
Description
Use the
terminal logging
command to enable log terminal display.
Use the
undo terminal logging
command to disable log terminal display.
By default, log terminal display is enabled for console users and terminal users.
Example
# Disable log terminal display.
<Sysname> undo terminal logging
1.1.24 terminal monitor
Syntax
terminal monitor
undo terminal monitor
View
User view
Parameter
None
Description
Use the
terminal monitor
command to enable the debugging/log/trap information
terminal display function.
Use the
undo terminal monitor
command to disable the function.
By default, this function is enabled for console users and terminal users.
This command works only on the current terminal. The debugging/log/trap information
can be output on the current terminal only after this command is executed in user view.
z
Disabling the function has the same effect as executing the following three
commands:
undo terminal debugging
,
undo terminal logging
and
undo
terminal trapping
. That is, no debugging/log/trap information will be displayed on
the current terminal.
z
If the function is enabled, you can run the
terminal debugging/undo terminal
debugging
,
terminal logging/undo terminal logging
or
terminal
trapping/undo terminal trapping
command to enable or disable debug/log/trap
terminal output respectively.
Example
# Disable terminal display.
<Sysname> undo terminal monitor
