Command Manual (For Soliton) – Login
H3C S3100 Series Ethernet Switches
Chapter 1 Login Commands
1-20
number
: User interface index. A user interface index can be relative or absolute.
z
In relative user interface index scheme, the
type
argument is required. In this case,
AUX user interfaces are numbered from AUX0 through AUX7; VTY user interfaces
are numbered from VTY0 through VTY4.
z
In absolute user interface index scheme, the
type
argument is not required. In this
case, user interfaces are numbered from 0 to 12.
Description
Use the
send
command to send messages to a user interface or all the user interfaces.
Examples
# Send “hello” to all user interfaces.
<Sysname> send all
Enter message, end with CTRL+Z or Enter; abort with CTRL+C:
hello^Z
Send message? [Y/N]y
The current user interface will receive the following information:
<Sysname>
***
***
***Message from vty1 to vty1
***
hello
1.1.18 service-type
Syntax
service-type
{
ftp
|
lan-access
|
{
ssh
|
telnet
|
terminal
}* [
level level
] }
undo service-type
{
ftp
|
lan-access
|
{
ssh
|
telnet
|
terminal
}* }
View
Local user view
Parameters
ftp
: Specifies the users to be of FTP type.
lan-access
: Specifies the users to be of LAN-access type, which normally means
Ethernet users, such as 802.1x users.
ssh
: Specifies the users to be of SSH type.
telnet
: Specifies the users to be of Telnet type.
