Command Manual (For Soliton) – 802.1x-System Guard
H3C S3100 Series Ethernet Switches
Chapter 1 802.1x Configuration Commands
1-11
Parameter
None
Description
Use the
dot1x handshake secure
command to enable the handshaking packet
secure function, preventing the device from attacks resulted from simulating clients.
Use the
undo dot1x handshake secure
command to disable the handshaking packet
secure function.
By default, the handshaking packet secure function is disabled.
Caution:
For the handshaking packet secure function to take effect, the clients that enable the
function need to cooperate with the authentication server. If either the clients or the
authentication server does not support the function, disabling the handshaking packet
secure function is needed.
Example
# Enable the handshaking packet secure function.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] dot1x handshake secure
1.1.8 dot1x max-user
Syntax
dot1x
max-user user-number
[
interface interface-list
]
undo dot1x
max-user
[
interface interface-list
]
View
System view, Ethernet port view
Parameter
user-number
: Maximum number of users a port can accommodate, in the range 1 to
256.
