Command Manual (For Soliton) – 802.1x-System Guard
H3C S3100 Series Ethernet Switches
Chapter 1 802.1x Configuration Commands
1-23
View
System view
Parameter
reauth-period reauth-period-value
: Specifies re-authentication interval, in seconds.
After this timer expires, the switch initiates 802.1x re-authentication. The value of the
reauth-period-value
argument ranges from 60 to 7,200.
Description
Use the
dot1x
timer reauth-period
command to configure the interval for 802.1x
re-authentication.
Use the
undo dot1x
timer reauth-period
command to restore the default 802.1x
re-authentication interval.
By default, the 802.1x re-authentication interval is 3,600 seconds.
Example
# Set the 802.1x re-authentication interval to 150 seconds.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] dot1x timer reauth-period 150
1.1.18 dot1x version-check
Syntax
dot1x version-check
[
interface interface-list
]
undo dot1x version-check
[
interface interface-list
]
View
System view, Ethernet port view
Parameter
interface-list
: Ethernet port list, in the form of
interface-list=
{
interface-type
interface-number
[
to
interface-type interface-number
] } &<1-10>, in which
interface-type
specifies the type of an Ethernet port and
interface-number
is the
number of the port. The string “&<1-10>” means that up to 10 port lists
can be provided.
Description
Use the
dot1x version-check
command to enable 802.1x client version checking for
specified Ethernet ports.
Use the
undo dot1x version-check
command to disable 802.1x client version
