Command Manual (For Soliton) – DLDP
H3C S3100 Series Ethernet Switches
Chapter 1 DLDP Configuration Commands
1-1
Chapter 1 DLDP Configuration Commands
1.1 DLDP Configuration Commands
1.1.1 display dldp
Syntax
display dldp
{
unit-id
|
interface-type interface-number
}
View
Any view
Parameter
unit
-
id
: Unit number of a device.
interface-type
: Port type.
interface-number
: Port number.
Description
Use the
display dldp
command to display the DLDP configuration of a unit or a port.
Example
# Display the DLDP configuration of unit 1.
<Sysname> display dldp 1
dldp interval 10
dldp work-mode enhance
dldp authentication-mode md5, cipher is ;)<01%^&;YGQ=^Q`MAF4<1!!
dldp unidirectional-shutdown manual
dldp delaydown-timer 1
The port number of unit 1 with DLDP is 1.
interface GigabitEthernet1/1/1
dldp port state : advertisement
dldp link state : up
The neighbor number of the port is 1.
neighbor mac address : 00e0-fc00-5690
neighbor port index : 372
neighbor state : two way
neighbor aged time : 12
