Command Manual (For Soliton) – FTP-SFTP-TFTP
H3C S3100 Series Ethernet Switches
Chapter 1 FTP and SFTP Configuration
Commands
1-24
View
System view
Parameters
time-out-value
: Timeout time, in the range 1 to 35,791, in minutes. The default value is
10.
Description
Use the
sftp timeout
command to set the idle timeout time on an SFTP server.
Use the
undo sftp timeout
command to restore the idle timeout time to the default
value.
If the idle timeout time exceeds the specified threshold, the system disconnects the
SFTP user automatically.
Examples
# Set the idle timeout time to 500 minutes.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] sftp timeout 500
1.4 SFTP Client Configuration Commands
1.4.1 bye
Syntax
bye
View
SFTP client view
Parameters
None
Description
Use the
bye
command to terminate a connection with the remote SFTP server and
return to system view.
This command has the same effect as that of the commands
exit
and
quit
.
Examples
# Terminate the connection with the remote SFTP server.
sftp-client> bye
