Command Manual (For Soliton) – ACL
H3C S3100 Series Ethernet Switches
Chapter 1 ACL Configuration Commands
1-6
1.1.6 display packet-filter
Syntax
display packet-filter
{
global | interface interface-type interface-number | port-group
[
group-id
]
|
unitid unit-id | vlan
[
vlan-id
]
}
View
Any view
Parameter
global
: Displays information about global packet filtering.
interface interface-type interface-number
: Displays information about packet filtering
on the port specified by
interface-type
and
interface-number
.
port-group group-id
: Displays information about packet filtering on the port group
specified by
group-id
.
unitid unit-id
: Displays information about packet filtering on the unit specified by
unit-id
.
The unit ID can be set only to 1.
vlan vlan-id
: Displays information about packet filtering on the VLAN specified by
vlan-id
.
Description
Use the
display packet-filter
command to display information about packet filtering.
Example
# Display information about packet filtering on the switch.
<Sysname> display packet-filter unitid 1
Ethernet1/0/1
Inbound:
Acl 2000 rule 0 running
Table 1-3
Description on the fields of the
display packet-filter
command
Field
Description
Ethernet1/0/1
Packet filtering is performed on Ethernet1/0/1.
Inbound
Packet filtering is performed in the inbound direction.
Acl 2000 rule 0
The rule 0 of ACL 2000 is used.
running
Status of the rule, which can be
z
running: The ACL rule is active.
z
not running: The ACL rule is inactive. Usually, this is
because the current time is out of the rule’s time range.