Command Manual (For Soliton) – IPv6 Management
H3C S3100 Series Ethernet Switches
Chapter 1 IPv6 Configuration Commands
1-8
z
begin
: Displays the first matching neighbor entry and all the neighbor entries
following it.
z
exclude
: Displays the neighbor entries not matching the specified regular
expression.
z
include
: Displays the neighbor entries matching the specified regular expression.
The regular expression supports various special characters. For details, refer to the
display current-configuration
command in
Configuration File Management
Command
.
Description
Use the
display ipv6 neighbors
command to display neighbor information.
You can use the
reset ipv6 neighbors
command to clear specific IPv6 neighbor
information.
Related commands:
ipv6 neighbor
,
reset ipv6 neighbors
.
Examples
# View all neighbor information.
<Sysname> display ipv6 neighbors all
Type: S-Static D-Dynamic
IPv6 Address Link-layer VID Interface State T Age
2008::110 0015-e9ac-69b6 1 GE1/1/2 REACH S -
FE80::215:E9FF:FEAC:69B6 0015-e9ac-69b6 1 GE1/1/2 STALE D 22
FE80::20F:E2FF:FE00:2201 000f-e200-2201 1 GE1/1/2 STALE D 28
2008::3610 000f-e200-2201 1 GE1/1/2 STALE D 28
Table 1-6
Description on the fields of the
display ipv6 neighbors
command
Field
Description
IPv6 Address
IPv6 address of a neighbor
Link-layer
Link layer address (MAC address of a neighbor)
VID
ID of the VLAN to which the interface connected to a
neighbor belongs
Interface
Interface connected to a neighbor
