Command Manual ( For Soliton ) – SSH
H3C S3100 Series Ethernet Switches
Chapter 1 SSH Commands
1-37
kk publickey null stelnet
1.1.32 ssh user service-type
Syntax
ssh user
username
service-type
{
stelnet
|
sftp
|
all
}
undo ssh user
username
service-type
View
System view
Parameters
username
: SSH user name, a string of 1 to 184 characters. It cannot contain any of
these characters: slash (/), backslash (\), colon (:), asterisk (*), question mark (?), less
than sign (<), greater than sign (>), and the vertical bar sign (|). In addition, the @ sign
can appear up to once, the username part (that is, the string before the @ sign) cannot
be more than 55 characters, and the domain name part cannot be more than 128
characters.
stelnet
: Specifies that the user can access the secure Telnet service.
sftp
: Specifies that the user can access the SFTP service.
all
: Specifies that the user can access both services (secure Telnet and SFTP).
Description
Use the
ssh user service-type
command to configure service type for a user so that
the user can access specified service(s).
Use the
undo ssh user service-type
command to remove the service type specified
for an SSH user.
The default service type for an SSH user is
stelnet
.
Related commands:
display ssh user-information
.
Examples
# Specify that user kk can access SFTP service.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] ssh user kk service-type sftp
# Display SSH user information.
[Sysname] display ssh user-information
Username Authentication-type User-public-key-name Service-type
kk publickey null sftp
