Command Manual (For Soliton) – Multicast
H3C S3100 Series Ethernet Switches
Chapter 2 Common Multicast Configuration
Commands
2-2
Table 2-1
display mac-address multicast static command output description
Field
Description
MAC ADDR
MAC address
VLAN ID
The VLAN in which the MAC address is manually added
STATE
State of the MAC address, which includes only
Config static
,
indicating that the table entry is manually added.
PORT INDEX
Ports out which the multicast packets destined for the multicast
MAC address are forwarded
AGING TIME(s)
Remaining lifetime of the entry.
NOAGED
indicates that the
entry never expires.
2.1.2 display multicast-source-deny
Syntax
display multicast-source-deny
[
interface interface-type
[
interface-number
] ]
View
Any view
Parameters
interface-type
: Port type.
interface-number
: Port number.
Description
Use the
display multicast-source-deny
command to display the multicast source port
suppression status.
z
With neither a port type nor a port number specified, the command displays the
multicast source port suppression status of all the ports on the switch.
z
With only a port type specified, the command displays the multicast source port
suppression status of all ports of that type.
z
With both a port type and a port number specified, the command displays the
multicast source port suppression status of the specified port.
Related commands:
multicast-source-deny
.
Examples
# Display the multicast source port suppression status of Ethernet 1/0/1.
<Sysname> display multicast-source-deny interface Ethernet 1/0/1
Ethernet1/0/1 Multicast-source-deny disabled.