Command Manual (For Soliton) – HWPing
H3C S3100 Series Ethernet Switches
Chapter 1 HWPing Commands
1-2
View
HWPing test group view
Parameters
size
: Size of a test packet in bytes. The value range varies with the test types.
Table 1-1
Value range of the HWPing test packets
Test type
Value range (in bytes)
Default (in bytes)
Jitter
68 to 8100
68
ICMP
4 to 8100
56
Udpprivate
4 to 8100
100
Udppublic
4 to 8100
100
The packet size configuration applies to ICMP, UDP, and jitter tests only.
Description
Use the
datasize
command to configure the size of a test packet in a test.
Use the
undo datasize
command to restore the default.
Examples
# Set the size of ICMP test packets to 50 bytes.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] hwping administrator icmp
[Sysname-hwping-administrator-icmp] test-type icmp
[Sysname-hwping-administrator-icmp] datasize 50
1.1.3 destination-ip
Syntax
destination-ip ip-address
undo destination-ip
View
HWPing test group view
Parameters
ip-address
: Destination IP address of a HWPing (pronounced Hua’Wei Ping) test.