Command Manual (For Soliton) – AAA
H3C S3100 Series Ethernet Switches
Chapter 1 AAA Configuration Commands
1-53
Examples
# Delete the stop-accounting requests buffered for user user0001@aabbcc.net.
<Sysname> reset stop-accounting-buffer user-name user0001@aabbcc.net
# Delete the stop-accounting requests buffered from 0:0:0 08/31/2002 to 23:59:59
08/31/2002.
<Sysname> reset stop-accounting-buffer time-range 00:00:00-08/31/2002
23:59:59-08/31/2002
1.2.21 retry
Syntax
retry
retry-times
undo retry
View
RADIUS scheme view
Parameters
retry-times
: Maximum number of transmission attempts of a RADIUS request, ranging
from 1 to 20.
Description
Use the
retry
command to set the maximum number of transmission attempts of a
RADIUS request.
Use the
undo retry
command to restore the default maximum number of transmission
attempts.
By default, the maximum number of RADIUS request transmission attempts is 3.
Note that:
z
The communication in RADIUS is unreliable because this protocol adopts UDP
packets to carry its data. Therefore, it is necessary for the switch to retransmit a
RADIUS request if it gets no response from the RADIUS server after the server
response timeout timer expires. If the switch gets no answer after it has tried the
maximum number of times to transmit a RADIUS request, the switch considers
that the request fails.
z
Appropriately setting this maximum number of transmission attempts according to
your network situation can improve the reacting speed of the system.
Related commands:
radius scheme
.