Command Manual (For Soliton) – Port Basic Configuration
H3C S3100 Series Ethernet Switches
Chapter 1 Port Basic Configuration
Commands
1-34
By default, no port group is configured.
Example
# Create port group 1.
<Sysname> system-view
[Sysname] port-group 1
[Sysname-port-group-1]
1.1.29 reset counters interface
Syntax
reset counters interface
[
interface-type | interface-type interface-number
]
View
User view
Parameter
interface
-
type
: Port type.
interface-number
: Port number.
For details about the parameters, see the parameter description of the
interface
command.
Description
Use the
reset counters interface
command to clear the statistics of the port, preparing
for a new statistics collection.
If you specify neither port type nor port number, the command clears statistics of all
ports.
If specify only port type, the command clears statistics of all ports of this type.
If specify both port type and port number, the command clears statistics of the specified
port.
The statistics of the 802.1x-enabled ports cannot be cleared.
Example
# Clear the statistics of Ethernet1/0/1.
<Sysname> reset counters interface ethernet1/0/1
1.1.30 shutdown
Syntax
shutdown
