Command Manual (For Soliton) – AAA
H3C S3100 Series Ethernet Switches
Chapter 1 AAA Configuration Commands
1-16
View
System view
Parameters
isp-name
: Name of an ISP domain, a string of up to 128 characters. This string cannot
contain the following characters: /\:*?<>|. If the domain name includes one or more “~”
characters and the last “~” is followed by numerals, it must be followed by at least five
numerals to avoid confusion. This is because any domain name longer than 16
characters will appear in the form of “system prompt-the first 15 characters of the
domain name~4-digit index” in the view prompt to avoid word wrap.
default
: Manually changes the default ISP domain, which is "system" by default. There
is one and only one default ISP domain.
disable
: Disables the configured default ISP domain.
enable
: Enables the configured default ISP domain.
Description
Use the
domain
command to create an ISP domain and enter its view, or enter the view
of an existing ISP domain, or configure the default ISP domain.
Use the
undo domain
command to delete a specified ISP domain.
The ISP domain "system" is used as the default ISP domain before you manually
configure the default ISP domain, and you can use the
display domain
command to
check the settings of the default ISP domain "system".
After you execute the
domain
command, the system creates a new ISP domain if the
specified ISP domain does not exist. Once an ISP domain is created, it is in the
active
state. You can manually specify an ISP domain as the default domain only when the
specified domain already exists.
Related commands:
access-limit
,
scheme
,
state
,
display domain
.
Examples
# Create a new ISP domain named aabbcc.net.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] domain aabbcc.net
New Domain added.
[Sysname-isp-aabbcc.net]
# Create a new ISP domain named 01234567891234567 (note that it will appear as
012345678912345~0001 in the view prompt).
<Sysname> system-view
System View: return to User View with Ctrl+Z.