Command Manual (For Soliton) – VLAN
H3C S3100 Series Ethernet Switches
Chapter 1 VLAN Configuration Commands
1-23
Field
Description
VLAN Type
VLAN type. Here, it refers to Protocol-based VLAN
Protocol-Index
Protocol template index
Protocol-Type
Protocol type specified in the protocol template. Refer to the
protocol-vlan
command for detailed description.
1.4.3 port hybrid protocol-vlan vlan
Syntax
port hybrid protocol-vlan
vlan
vlan-id
{
protocol-index
[
to
protocol-index-end
] |
all
}
undo
port hybrid protocol-vlan
vlan
vlan-id
{
protocol-index
[
to
protocol-index-end
]
|
all
}
View
Ethernet port view
Parameters
vlan
-
id
: Specifies the ID of the protocol VLAN bound with the port. The value range is 1
to 4094. At least one protocol template must have been configured for the VLAN.
protocol-index
: Specifies a protocol template, in the range of 0 to 15.
to protocol-index-end
: In conjunction with
protocol-index
, specify a protocol index
range. The
protocol-index-end
argument takes a value in the range of 0 to 15 and must
be greater than
protocol-index
.
all
: Specifies all protocol indexes. With the
all
keyword, the
port hybrid protocol-vlan
vlan
command binds the port with all the protocol templates of the specified protocol
VLAN, and the
undo
form of the command removes the associations between the port
and all the protocol templates of the specified protocol VLAN.
Description
Use the
port hybrid protocol-vlan vlan
command to bind the port with the specified
protocol template(s) of a protocol VLAN.
Use the
undo
port hybrid protocol-vlan vlan
command to remove the binding
between the port and the specified protocol template(s) of a protocol VLAN.