Command Manual (For Soliton) – AAA
H3C S3100 Series Ethernet Switches
Chapter 1 AAA Configuration Commands
1-19
View
Local user view
Parameters
level
: Privilege level to be set for the user. It is an integer ranging from 0 to 3.
Description
Use the
level
command to set the privilege level of the user. The privilege level of the
user corresponds to the command level of the user. For detailed information, refer to
the description of the
command-privilege level
command in the
command line
interface
part.
Use the
undo level
command to restore the default privilege level of the user.
The default privilege level is 0.
Note that:
z
If the configured authentication method is none or password authentication, the
command level that a user can access after login is determined by the level of the
user interface.
z
If the configured authentication method requires a username and a password, the
command level that a user can access after login is determined by the privilege
level of the user. For SSH users using RSA shared key for authentication, the
commands they can access are determined by the levels sets on their user
interfaces.
Related commands:
local-user
.
Examples
# Set the level of user1 to 3.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] local-user user1
New local user added.
[Sysname-luser-user1] level 3
1.1.17 local-user
Syntax
local-user user-name
undo local-user
{
user-name
|
all
[
service-type
{
ftp
|
lan-access
|
ssh
|
telnet
|
terminal
} ] }