Command Manual (For Soliton) – 802.1x-System Guard
H3C S3100 Series Ethernet Switches
Chapter 1 802.1x Configuration Commands
1-12
interface-list
: Ethernet port list, in the form of
interface-list=
{
interface-type
interface-number
[
to
interface-type interface-number
] } &<1-10>, in which
interface-type
specifies the type of an Ethernet port and
interface-number
is the
number of the port. The string “&<1-10>” means that up to 10 port lists
can be provided.
Description
Use the
dot1x
max-user
command to set the maximum number of users an Ethernet
port can accommodate.
Use the
undo dot1x
max-user
command to revert to the default maximum user
number.
By default, a port can accommodate up to 256 users.
In system view:
z
If you do not provide the
interface-list
argument, these two commands apply to all
the ports of the switch.
z
If you specify the
interface-list
argument, these two commands apply to the
specified ports.
In Ethernet port view, the
interface-list
argument is not available and the commands
apply to only the current port.
Related command:
display dot1x
.
Example
# Configure the maximum number of users that Ethernet1/01 port can accommodate to
be 32.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] dot1x max-user 32 interface Ethernet 1/0/1
1.1.9 dot1x port-control
Syntax
dot1x
port-control
{
auto
|
authorized-force
|
unauthorized-force
}
[
interface
interface-list
]
undo dot1x
port-control
[
interface interface-list
]
View
System view, Ethernet port view
Parameter
auto
: Specifies to operate in
auto
access control mode. When a port operates in this
mode, all the unauthenticated hosts connected to it are unauthorized. In this case, only
