Command Manual (For Soliton) – Link Aggregation
H3C S3100 Series Ethernet Switches
Chapter 1 Link Aggregation Configuration
Commands
1-1
Chapter 1 Link Aggregation Configuration
Commands
1.1 Link Aggregation Configuration Commands
1.1.1 display link-aggregation interface
Syntax
display link-aggregation interface interface-type interface-number
[
to
interface-type
interface-number
]
View
Any view
Parameter
interface-type
: Port type.
interface-number
: Port number.
to
: Specifies a port index range, with the two
interface-type interface-number
argument
pairs around it as the two ends.
Description
Use the
display link-aggregation interface
command to display the link aggregation
details about a specified port or port range.
Note that as ports in a manual link aggregation groups do not acquire the information
about their peers automatically, so the entries in the information about the peer ports
displayed are all 0 instead of the actual values.
Example
# Display the link aggregation details on Ethernet 1/0/1.
<Sysname> display link-aggregation interface Ethernet1/0/1
Ethernet1/0/1:
Selected AggID: 1
Local:
Port-Priority: 32768, Oper key: 2, Flag: 0x45
Remote:
System ID: 0x8000, 0000-0000-0000
Port Number: 0, Port-Priority: 32768 , Oper-key: 0, Flag: 0x38