Command Manual (For Soliton) – AAA
H3C S3100 Series Ethernet Switches
Chapter 1 AAA Configuration Commands
1-27
Use the
self-service-url disable
command to disable the self-service server location
function
Use the
undo self-service-url
command to restore the default state of this function.
By default, this function is disabled.
Note that:
z
This command must be used with the cooperation of a self-service-supported
RADIUS server (such as CAMS). Through self-service, users can manage and
control their accounts or card numbers by themselves. A server installed with the
self-service software is called a self-service server.
z
After this command is executed on the switch, a user can locate the self-service
server through the following operation: choose [change user password] on the
802.1x client, the client opens the default browser (for example, IE or Netscape)
and locates the URL page used to change user password on the self-service
server. Then, the user can change the password.
z
A user can choose the [change user password] option on the client only after
passing the authentication. If the user fails the authentication, this option is in grey
and is unavailable.
Examples
# Under the default ISP domain "system", set the URL of the web page used to modify
user password on the self-service server to http://10.153.89.94/selfservice/modPassw
d1x.jsp|userName.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] domain system
[Sysname-isp-system] self-service-url enable
http://10.153.89.94/selfservice/modPasswd1x.jsp|userName
1.1.25 service-type
Syntax
service-type
{
ftp
|
lan-access
|
{
telnet
|
ssh
|
terminal
}* [
level level
] }
undo service-type
{
ftp
|
lan-access
|
{
telnet
|
ssh
|
terminal
}* }
View
Local user view
Parameters
ftp
: Specifies that this is an FTP user.
lan-access
: Specifies that this is a LAN access user (who is generally an Ethernet
access user, for example, 802.1x user).
