Command Manual (For Soliton) – QoS-QoS Profile
H3C S3100 Series Ethernet Switches
Chapter 1 QoS Commands
1-17
Example
# Limit the outbound traffic rate to 128 kbps on Ethernet 1/0/1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] line-rate outbound 128
# Display the line rate configuration on Ethernet 1/0/1.
[Sysname-Ethernet1/0/1] display qos-interface Ethernet 1/0/1 line-rate
Ethernet1/0/1: line-rate
Outbound: 128 Kbps
1.1.18 mirrored-to
Syntax
mirrored-to
inbound
acl-rule
{
cpu
|
monitor-interface
}
undo mirrored-to
inbound
acl-rule
View
System view, Port group, Ethernet port view
Parameter
inbound
: Duplicates inbound packets.
acl-rule
: ACL rules to be applied. This argument can be the combination of multiple
ACLs. For more information about this argument, refer to
Table 1-8
and
Table 1-9
. Note
that the ACL rules referenced must be those defined with the
permit
keyword specified.
Table 1-8
Ways of applying combined ACL rules
ACL combination
Form of the acl-rule argument
Apply a basic or advanced Layer 3 ACL
ip-group
acl-number
Apply a rule in an Layer 3 ACL
ip-group acl-number
rule
rule-id
Apply all the rules in a Layer 2 ACL
link-group acl-number
Apply a rule in a Layer 2 ACL
link-group acl-number
rule
rule-id
Apply all the rules in an IPv6 ACL
user-group acl-number
Apply a rule in an IPv6 ACL
user-group acl-number
rule
rule-id
Apply a rule in an Layer 3 ACL and a rule
in a Layer 2 ACL
ip-group acl-number
rule
rule-id
link-group acl-number
rule
rule-id